| |
|
|
|
| |
|
|
|
 |
 |
 |
 |
| |
|
|
|
| |
Operation
|
|
Operation bar is
manually fed on to number of discs made out of H.S.S. (Hard
& Ground) These
discs are designed to rotate at r.p.m. of 1440, thus imparting very high
speeds to the bar. This facilitates polishing of the bar and at the
same time helps in transporting of the bar to nozzles.
|
|
A set of three straightens
the bar to a very high degree.
|
|
|
The Production rate and
quality of polishing compares well even with imported machines.
|
|
|
The bar is guided by
two brass blocks. Another brass pipe is Provided at the end of bar
machine to guide the machine on to the wooden sleeper.
During the working of the machine, oil is circulated continuously which
achieves better lubrication, less wear and tear of discs and
controls temperature. This also helps to achieve better finish to
the product. |
|
|
| |
|
 |
| |
Specification
|
| |
|
Disc Polishing Machine |
|
Working range |
: |
Ø 10-25 mm |
|
Bar length |
: |
Minimum 1000 mm
Maximum to customers
specification |
|
Out put |
: |
35 Meter / Minute |
|
Motors |
: |
30 H.P. 1440 RPM |
|
Coolant Pump |
: |
1 H.P. |
|
Weight |
: |
3.5 Ton (approx.) |
|
 Polishing disc HSS hard and ground
Not Reduce in Diameter after
Polishing
Polishing Oil Grade ILO Cut 482(Castrol)
Gear Box Oil Grade 20W 40(Castrol)
One year onsite warranty
|
|
NOTE:
The
Gear box oil must be checked at least once a week |
|
|
|
| |
| Diagram of Disc Polishing Machine |
 |
| |
|
List of Components used in
Machine |
| |
| |
S.No. |
Items |
Materials |
01 |
Polishing Disc |
HSS |
02 |
STG Nozzle |
HCHC |
03 |
Shafts |
EN 353 |
04 |
Gears |
EN 353 |
05 |
Guide Plate |
Brass |
06 |
Guide |
EN 31 |
07 |
STG
Unit |
Steel Casting |
08 |
Main Gear Box |
C.1 Casting |
09 |
Bearing |
As per Requirement |
10 |
Main Body |
Fabricated |
|
|
|
